Solved!! solved!! solved!!
checkout the comments here first.if you dont find it working ,then reading down here may help.
this tutorial is for ut-300r2u modems with old firmware.
for tutorial on new firmware visit here.
i am not using the modem which is using this particular firmware.i got this method from a friend of mine who is successfully using it ,and downloading data of 2.5 gb per session. i havent tested this method on my machine.
screenshots will be provided little later.
in this method you will have to download a configuration file
.every other setting is already made.you will have to just edit the username and password thing in the file to your dataone username and password.save the file.and now the file is ready to use.
the only worse thing in this method is,you will have to search for the words username and password in this config file and then change it to yours.
you can get the file here.
go to configuration settings in your modem page and give the path to downloaded file.
and rest should be in place and portforwarding should be done successfully.
i know this tutorial is somewhat abstract ,if u had tried to portforward before this then this must be easy,however first timers will find it difficult though.i am hoping to get those screenshots asap.
please do try and comment.
September 7th, 2008 at 3:20 am
Hey i tried this process but it didnt work for me… so can you please suggest another method or is there any way that i can update my old firmware…??
September 7th, 2008 at 3:25 am
as far as i know updating the old firmware is not possible.but you can try various other options.
try the above method once again. did u try dmz option?
September 7th, 2008 at 3:37 am
No the dmz is not the problem.. In uTorrent it always shows a RED triangle.. The above method stops my internet access altogether.. I will HAVE to revert back to the default settings to continue downloading..
September 7th, 2008 at 4:26 am
chirag,are u sure you changed your username and password??
September 7th, 2008 at 9:04 am
Yes i did.. Just to make sure, shall i send you the screenshots of my firmware to your gmail? Maybe you can figure out if it is probably an even older version or something…
January 14th, 2009 at 6:01 am
Hey guys i did wat u told…. mine is a UL750 plan and im getting only 30kbs max still after all the above mentioned steps ……..is there any other way to increase the speed or the only way is to change the plan to 500+…. ah…………….thankx…………..happy new year and happy pongal to all………..
January 24th, 2009 at 11:06 am
password should be entered in encrypted form.
Get that from original .conf file
May 16th, 2009 at 5:08 pm
first of all thanks a lot for the steps.
go to configuration settings in your modem page and give the path to downloaded file
I did not understand this part so Im still facing the same prob of yellow exclamation mark.
All the steps above it i have done.
we are required to save that conf file and change the user name and password only that much right?
June 3rd, 2009 at 2:07 am
You will have to give screenshots if this post is to be useful. Configuration settings page does not just give an option to change path. Kindly tell us where and do post those screenshots.. Otherwise a useful post
December 5th, 2009 at 2:22 pm
Board ID: 96338L-2M-8M
Software Version: 3.08.02.UB.01.14_1357_100807
Bootloader (CFE) Version: 1.0.37-10.1
Firmware Version: UT300R2U.0011.01
Hardware Version: UT300R2U 2.2
Model Name: UT300R2U
Hi,
I am G R Reddy From Surana Industries Limited I need updated firmware so please any one can send me the latest firmware version .
Regards,
GRREDDY